Mender-Haüs™Management Systems · Regulatory Compliance
01

Primary Source

A brief from The Mender-Haüs Corporation

Issue 03 · November 2026Verified 20 November 2026
02

The month in one line

Your transition deadlines are 30 April 2029 for ISO 14001 and 30 September 2029 for ISO 9001, the first milestone has already passed, and the next one falls on 31 January 2027

Both periods are now fixed by mandatory documents you can read. This issue sets out every date between here and them, what your certification body is obliged to tell you and when, and what to do in each of the next four quarters.

Correction to Issue 02

Issue 02 reported that the documents setting these deadlines had not been issued. They had. Global ACI announced the ISO 14001 transition requirements on 14 September 2026 and the ISO 9001 requirements on 16 September 2026.

The dates below are the corrected position, read from the two documents themselves. A dated correction notice has been added to the Issue 02 page rather than the claim being quietly amended.

Item one

The two deadlines, and the twelve dates between here and them

Both documents are mandatory — that is what the (M) in the reference means. Both run their clocks from the last day of the month in which the standard published, which is why the two schedules sit five months out of step with each other. ISO 9001:2026 published 16 September 2026. ISO 14001:2026 published 15 April 2026.

ISO 14001TECH-3-TR 2029-04-30 (M), v1.0Date
Accreditation body ready to assess, transition process announced 31 October 2026passed
Certification body declares readiness to its accreditation body 31 January 2027
A certification body that will not transition notifies its clients 31 January 2027
Accreditation body transition decisions complete 30 April 2027
Last date for new or initial ISO 14001:2015 certifications 31 October 2027
At least one witnessed assessment to ISO 14001:2026 completed before 30 April 2029
End of transition 30 April 2029
ISO 9001TECH-3-TR 2029-09-30 (M), v1.1Date
Accreditation body ready to assess, transition process announced 31 March 2027
Certification body declares readiness to its accreditation body 30 June 2027
A certification body that will not transition notifies its clients 30 June 2027
Accreditation body transition decisions complete 30 September 2027
Last date for new or initial ISO 9001:2015 certifications 31 March 2028
All certified clients transitioned; 2015 certifications no longer valid 30 September 2029
End of transition 30 September 2029
The first gate is already behind us

The ISO 14001 accreditation body readiness date fell on 31 October 2026. If you hold ISO 14001 certification, your accreditation body was due to be ready to assess certification bodies against the 2026 edition, and to have announced how it will run the transition, three weeks ago. That is a checkable thing and it is checkable by you: go to your accreditation body’s website and look for the announcement.

The three hard stops

Most of the dates above bind your certification body rather than you. Three of them reach you directly, and they are the ones to put in a plan.

  • 31 October 2027 — the last date a new or initial certification to ISO 14001:2015 may be issued. 31 March 2028 for ISO 9001:2015. This catches people who are not thinking about transition at all: if you plan to add a site, extend a scope, or bring a newly acquired operation into certification, after these dates it cannot be certified to the old edition.
  • 30 April 2029 and 30 September 2029 — the end. Both documents are explicit and the language is not soft. Certifications to the 2015 editions are no longer valid after the end date. A certificate may not be extended beyond it. Accredited certification that has not transitioned is to be withdrawn. There is no provision for a certificate that simply runs on.
If you run them as one system

Every ISO 14001 gate falls earlier than its ISO 9001 counterpart, and the two end dates are five months apart. A single transition audit covering both is the obvious efficiency, and the documents permit it — but the earlier standard sets the pace. The practical deadline for an integrated system is 30 April 2029, not 30 September 2029, unless you are prepared to transition the two halves separately and run a period where one is on the 2026 edition and the other is not.

03

Item two

What to do, in order

Two and a half years sounds like room. It is four audit cycles, and the transition audit has to fit inside one of them. The sequence below works backward from that rather than from the end date.

Before the end of this year

  • Check your accreditation body published its ISO 14001 transition process. It was due 31 October 2026. If you cannot find it, that is a question for your certification body, and a useful one.
  • Ask your certification body one question, in writing: have you declared readiness to your accreditation body, and on what date. Their deadline is 31 January 2027 for ISO 14001 and 30 June 2027 for ISO 9001. The answer tells you whether you are dealing with a body that is ahead of its own schedule or behind it, and that is the single most useful thing you can learn right now.
  • Buy both standards and run the clause-number check across your documented information. Every procedure, form, register, competence matrix and audit checklist that cites a 2015 clause number needs checking against the new numbering. None of it is difficult. All of it is finite. It is almost always found later than it should be.

By 31 January 2027, and by 30 June 2027

These are the dates by which a certification body that is not going to transition must tell its clients so — 31 January for ISO 14001, 30 June for ISO 9001. If that applies to you, you are changing certification body as well as changing edition, and that is a much longer job.

Silence is not confirmation. If you have heard nothing by those dates, ask rather than assume.

Through 2027

  • Accreditation body decisions complete 30 April 2027 for ISO 14001 and 30 September 2027 for ISO 9001. After those dates your certification body either can or cannot certify to the new editions, and you can find out which.
  • Book the transition audit against your own cycle. It may be combined with your surveillance audit, combined with your recertification audit, or run as a separate special audit. Work backward from your certificate expiry rather than from 2029 — the useful question is which of your remaining scheduled audits the transition rides on.

What your certification body owes you

Three separate obligations in these documents run toward you, and all three are worth knowing you are owed.

  • A body that does not intend to transition must notify its accreditation body in writing, and must notify its clients, by the dates above.
  • A body that fails to notify its accreditation body or to meet the requirements must notify all affected clients in writing of the delay and its potential impact.
  • Where a client declines to transition, the body must inform that client its certification will expire at the end of the transition period.

On additional audit time, if you are quoted it

The answer is a qualified yes, and the qualification is yours to use. The certification body is required to consider whether additional time is needed, including justification for the calculation, by reference to ISO/IEC 17021-1 and to IAF MD 5 — now Global ACI-TECH-3-004. The ISO 9001 document adds that it must consider, at minimum, the degree of change to your management system and whether the transition audit is combined with an annual audit or run separately. Both documents note that additional time may not be needed for a full system audit.

So it is neither automatic nor nothing, and the calculation has to be justified. If you are quoted additional days, you are entitled to see the justification, and the governing time-determination document is a published one you can read for yourself.

The transition audit may also be delivered remotely through information and communication technology under IAF MD 4 — now Global ACI-TECH-3-003 — provided the certification body can demonstrate the audit objectives are met.

Two other transition clocks, in case either is yours

ISO/IEC 17024:2026 — Global ACI-TECH-3-TR 2029-03-31 (M), transition ending 31 March 2029. Its gates are materially looser: accreditation body readiness at eighteen months rather than six, certification body declaration at twenty-four months rather than nine. If you hold personnel certification, that is the schedule you are on.

ISO 37001:2025 — Global ACI-TECH-3-TR 2027-02-28 (M), transition ending 28 February 2027. Fifteen months, not three years, and it is fourteen months from now. If you hold anti-bribery certification this is the nearest management-system deadline in this issue by a wide margin.

One housekeeping point

The ISO 9001 transition document is at version 1.1. Version 1.1 added the explicit end date — “Three years (30 September 2029)” — to Section 2. Version 1.0 stated the three-year rule without printing the date. Both get you to the same place; only one prints it. The listing still shows an issue date of 4 September 2026 for version 1.1, so the listing will not tell you which version you are holding. The filename will.

04

Item three

The HazCom employer date is today, and it has not moved again

Today is 20 November 2026. That is the compliance date at 29 CFR 1910.1200(j)(2)(ii) — employers, substances.

It has not moved. Issue 02 flagged that this date had already moved twice and should be re-checked before anyone relied on it. It has been re-checked. No further extension, delay or stay has been published. The only compliance-date change remains the final rule at 91 FR 1695, published and effective 15 January 2026, which moved all four dates out by four months. Nothing published since touches them.

No enforcement discretion either. OSHA’s enforcement memoranda for 2026 concern civil penalty adjustments, COVID-19 recording, the ITA Non-Responder program, handrails and stair rails, and the low-hazard industries table. None concerns hazard communication. The inspection directive, CPL 02-02-079, effective 19 May 2026, permits an employer during the transition period to comply with HCS 2012, with HCS 2024, or with both — and that latitude ends on your applicable date, which for substances is today.

What today actually requires

Narrower than the summaries suggest. For substances, as necessary: update any alternative workplace labeling used under paragraph (f)(6), update the hazard communication program required by (h)(1), and provide additional employee training under (h)(3) for newly identified physical hazards, health hazards or other hazards.

Three things follow. It is triggered by what is newly identified, not by the calendar alone. It reaches in-plant labeling, not shipped container labels — those were the manufacturer’s obligation and were due in May. And it is owed at every site; the duty does not discharge at corporate level.

Two things to disregard

A Federal Register document touching 1910.1200 published on 18 November 2026 and will appear in alerts for this standard. It is a notice extending the Office of Management and Budget’s approval of the information-collection requirements under the Paperwork Reduction Act. It is not a compliance-date change.

And Issue 02 warned that OSHA’s own standard page for 1910.1200 still showed the pre-extension dates. That page has since been corrected and now shows 19 May 2026, 20 November 2026, 19 November 2027 and 19 May 2028. A different OSHA page is stale instead — osha.gov/hazcom/effective-dates still publishes only the 2012 rule’s schedule. The regulation is what binds, and the eCFR text of 1910.1200 is the place to read it.

05

Item four

The hard part: downstream uses

Everything in Item Three is calendar and citation. This is the requirement that changes what a classifier has to do, and OSHA has said more about it than the rule text does. This is the item Issue 02 held over.

Paragraph (d)(1) was rewritten so that hazard classification shall include any hazards associated with the chemical’s intrinsic properties including a change in the chemical’s physical form, and chemical reaction products associated with known or reasonably anticipated uses or applications.

Reaction products. From uses that happen after the chemical leaves you.

OSHA’s position, from the preamble and restated in the Questions and Answers document, sets four limits on how far that reaches.

  • Known or reasonably anticipated only. Classifiers are not required to anticipate every conceivable way a chemical could be used. The classification should give downstream users enough to perform their own workplace-specific hazard assessment (89 FR 44281).
  • A reasonable effort, not an investigation. It typically covers uses advertised on the packaging and other uses the classifier knows of at the outset. Classifiers are not required to contact every downstream workplace.
  • Proprietary processes are out. A downstream user’s proprietary process producing trade secret derivatives is not something OSHA considers a manufacturer able to know or reasonably anticipate (89 FR 44283).
  • One step, not the whole chain. Per the inspection directive, the first employer meeting the definition of a manufacturer need not consider downstream uses more than one step away — uses involving a version of the product already chemically reacted after its sale. OSHA’s example: a supplier of methyl methacrylate need not warn on the hazards of products made from the polymethyl methacrylate a second manufacturer creates from it.

And where the uses are genuinely too many to anticipate — OSHA’s example is toluene as a manufacturing starting material — the obligation does not vanish. It moves. The manufacturer must still ensure Section 10 of the safety data sheet carries the stability and reactivity information a downstream manufacturer needs to assess its own process (89 FR 44282).

The pattern is worth naming, because it is where the disputes will be

An upstream manufacturer separated from users only by importers or distributors — intermediaries that do not use the chemical in a production process of their own — must make a reasonable effort to obtain reliable information about reaction products. Distance through a distributor is not distance for this purpose. Distance through another manufacturer’s reaction is.

Four supporting points, each correcting something in circulation

The Appendix D updates revise safety data sheet Sections 2, 3, 9 and 11. Several secondary-source lists name other sections.

The Appendix A updates align primarily with revised health hazard definitions in GHS Revision 7, with non-animal test methods from Revision 8 added to skin corrosion and irritation to promote use of alternative methods. Skin corrosion and irritation. Not serious eye damage.

Four provisions are explained by trading-partner alignment rather than GHS alignment. The small package provisions at (f)(12) — the 3 ml and 100 ml thresholds — follow Health Canada’s WHMIS, and so do the prescribed concentration ranges for trade secret claims at paragraph (i). “Released for shipment” is now defined similarly to the EPA’s definition at 40 CFR 152.3, and the bulk shipment provisions at (f)(5) were written for compatibility with Department of Transportation requirements.

Where the GHS has got to. OSHA’s 2024 preamble recorded Revision 9, published July 2021, as then the latest. It has moved twice more since — Revision 10 in 2023, Revision 11 in 2025 — and OSHA has adopted neither. A United States hazard communication program built to the current edition of the GHS is built to something the standard does not ask for.

And the one that arrived as a typo fix

There have been three correction notices to the 2024 rule, not one. The notice at 91 FR 562, published and effective 8 January 2026, is presented as correcting errors of a minor, mainly typographical nature, and was exempted from notice and comment on that basis. Most of it is. Some of it is not.

  • The definition of “physical hazard” was revised to include chemicals under pressure.
  • In Appendix C, Figure C.1, chemicals under pressure was added to the hazard classes carrying the gas cylinder pictogram.
  • In table C.4.16, an “In case of fire” precautionary statement was added and the hazard statements for Categories 1 through 3 revised.
  • In table C.4.30, desensitized explosives, “and large quantities” was added to the Category 4 response.

Label content changed. It arrived as a typo fix.

And the EPCRA change is still coming

On a different calendar, through a different agency. The EPA rule at 91 FR 37022, published 22 June 2026 and effective 21 August 2026, replaces the 24 EPCRA hazard categories by directly incorporating the 118 OSHA hazard categories and subcategories. Compliance date 1 January 2028; first reporting year 2027, filed by 1 March 2028. No stay, amendment or reconsideration has been published in the Federal Register and no challenge is reported as at 20 November 2026. Your Tier II report changes, and it changes on a third calendar.

06

Item five

The Global ACI mark: still nothing to do

Issue 02 reported that no notification to Full Members and no authorization for use of the Global ACI MRA Mark would be made before a formal decision at the MRAC meeting in October 2026.

October 2026 has passed and the position has not changed. Global ACI’s Frequently Asked Questions still answers “No” to whether the mark is available for use by Full Members, and still states that Full Members are not currently authorised to use it in any economy. Global ACI held its 2026 Annual Meetings in Panama City from 19 to 26 October and the Fifth General Assembly adopted resolutions 2026-35 through 2026-80. None mentions the MRA Mark. Global ACI-MRA-006, which governs its use, remains at version 1.0.

Whether the committee met and the outcome is simply unpublished, or whether no decision was taken, the published record does not say, and this brief is not going to guess between them.

For a certified organization

Nothing to do, and that answer has now survived three issues. Your certificate is unaffected. Where it will matter is at your next renewal or re-issue after your accreditation body is notified — and notification follows legal availability of the mark economy by economy, so there is no single date to put in a plan.

Item six

ISO 45001, because everyone with an integrated system is now asking

Short answer: there is no 2026 edition of ISO 45001, no transition document, and nothing for you to do.

ISO 45001:2018 remains the current standard, first edition, March 2018, together with Amendment 1:2024 on climate action changes. Its ISO catalogue stage code is 90.92 — International Standard to be revised — with a stage date of 31 May 2024. ISO’s page records that the publication was last reviewed and confirmed in 2024 and that this version remains current.

A revision is under way as ISO/DIS 45001, and ISO’s own FAQ states that publication is planned as ISO 45001:2027. This brief is not going to print a stage code for the draft, because the ISO page that would carry it could not be read at source.

When it does publish, the pattern in Item One is what to expect: a mandatory transition document inside five months, three years to the end date, and the first gate — accreditation body readiness — six months in. If you run an integrated system, that will add a third clock to the two in this issue, and it will run later than both.

Next issue

December

Whether any accreditation body has published its ISO 14001 transition process, two months after the date it was due. Whether the Global ACI mark decision has been published. And the ISO 37001:2025 transition, which ends 28 February 2027 and is the nearest management-system deadline nobody is talking about.

Checked against

  1. Global ACI-TECH-3-TR 2029-04-30 (M), Transition Requirements for ISO 14001:2026, version 1.0, issue date 4 September 2026, implementation date 14 September 2026 — Sections 2, 4, 5.1, 5.2, 6.2 and the Section 7 amendment table.
  2. Global ACI-TECH-3-TR 2029-09-30 (M), Transition Requirements for ISO 9001:2026, version 1.1, issue date 4 September 2026, implementation date 16 September 2026 — Sections 2, 4, 5.1, 5.2, 6.2, 6.3, 6.4 and the Section 7 amendment table.
  3. Global ACI news items announcing both documents, 14 September 2026 and 16 September 2026.
  4. Global ACI-TECH-3-TR 2029-03-31 (M), Transition Requirements for ISO/IEC 17024:2026, version 1.1, implementation 9 September 2026; and Global ACI-TECH-3-TR 2027-02-28 (M), Transition Requirements for ISO 37001:2025, version 1.0, issued 10 July 2026, implementation 31 August 2026.
  5. Global ACI General Assembly resolutions 2026-35 to 2026-80, Panama City, adopted October 2026, including resolution 2026-71, Arrangement Committee; Global ACI Frequently Asked Questions on MRA Mark availability and authorisation, retrieved 20 November 2026; and Global ACI-MRA-006, version 1.0, issue date 23 October 2025, implementation 1 January 2026.
  6. ISO catalogue entries: ISO 9001:2026, sixth edition, published 16 September 2026, stage 60.60; ISO 14001:2026, fourth edition, published 15 April 2026, stage 60.60; ISO 45001:2018, first edition, March 2018, stage 90.92 International Standard to be revised, stage date 31 May 2024, together with ISO 45001:2018/Amd 1:2024.
  7. OSHA, Hazard Communication Standard; Final Rule, 89 FR 44144, 20 May 2024, document 2024-08568, effective 19 July 2024 — including the preamble discussion at 89 FR 44281, 44282 and 44283.
  8. OSHA, 91 FR 1695, published and effective 15 January 2026, document 2026-00653 — the four-month extension of the compliance dates at 1910.1200(j)(2) and (j)(3); and a Federal Register search for all documents touching 1910.1200 published after 15 January 2026, confirming no further change to those dates.
  9. The three correction notices to the 2024 rule: 9 October 2024, document 2024-23144; 91 FR 562, published and effective 8 January 2026, document 2026-00147; and 91 FR 6760, 13 February 2026, document C1-2026-00147.
  10. The regulatory text of 1910.1200(d)(1), (j)(1), (j)(2), (j)(3) and (j)(4) as it appears in the eCFR, retrieved 20 November 2026; OSHA’s standard page for 1910.1200, retrieved 20 November 2026, now showing the post-extension dates; and the hazard communication effective-dates page at osha.gov/hazcom/effective-dates, retrieved 20 November 2026, still showing only the 2012 schedule.
  11. OSHA, Questions and Answers for OSHA’s 2024 Update to the Hazard Communication Standard; OSHA Instruction CPL 02-02-079, Inspection Procedures for the Hazard Communication Standard (HCS 2024), effective 19 May 2026; OSHA’s enforcement memoranda listing for 2026; and the Federal Register notice of 18 November 2026 extending OMB approval of the hazard communication information collection.
  12. EPA, EPCRA Hazardous Chemical Inventory Reporting Requirements: Conformity With the 2024 OSHA Hazard Communication Standard, 91 FR 37022, published 22 June 2026, document 2026-12426, effective 21 August 2026, 40 CFR Part 370, RIN 2050-AH40; and a Federal Register search for subsequent EPCRA documents, confirming no stay, amendment or reconsideration.

Every date, stage code and citation in this brief was read from the issuing body’s own document on 20 November 2026. Where a thing has not been decided, this brief says so rather than estimating. This is commentary on published documents and is not legal advice.